Cart

Bullet Goose Neck Vent - Box

Goose Neck Vent vents kitchen hoods or dryer vents through the roof.

Bullet Goose Neck Vent - Box
Free Shipping
IN STOCK

Bullet Goose Neck Vent - Box

28 Reviews
Write Review
This is some text inside of a div block.

16 Per Box. The Bullet Goose Neck Vent is used for kitchen vent exhaust and dryer vent exhaust that terminate through the roof surface. The 9" option is 12.5" tall for tile roof installation and comes in Brown, Gray, Terracotta (Order Terracotta By Phone), and Weathered Wood Color. For all other sizes, see choices below. 9" for Tile per unit price = $54.75. 8" per unit price = $39.57. 10" per unit price = $44.33.

860009278516
Price:
Per Box
$ 756.80 USD
(as low as
$47.30
Each)
Details
Almost Indestructable
  • Heavy-duty polypropylene carbonate construction
  • 35-year warranty
  • 100% UV protected9x9 High Profile Available in Low and High Profile
  • Will not crack in heat or cold
  • One-piece base assures no leaking
  • Many colors to choose from
  • No painting (matches our pipe boot)
  • Comes with a rain damper and pest screen
  • Built-in cricket for enhanced water flow
  • 3 sizes – 8” and 10” and 9″ tall
  • The 9" Bullet Gooseneck Vent is 12.5" tall for tile roof installation

The Bullet Vent (Bullet Goose Neck Vent) is designed to be a no-leak and aesthetically pleasing alternative to old style metal gooseneck vents. This innovative product comes with a built in diverter/cricket, a debris screen and rain damper.

UV Protected Polypropylene Carbonate with removable black plastic damper and debris/pest screen.

ASTM E330-02, FBC Code 6th Edition 2017 Section 1708.2 compliant Wind Uplift Resistance: -305 PSF (12 fasteners)

Design wind uplift pressure resistance in ASD with safety factor of 2-1. Florida Product Approval # FL25870.2, Evaluation Report 17-209-GN-ER Environmental Resistance: Excellent resistance to Ozone, UV, water, alcohol, weak acids & chlorine.‍

Service Temp: -59 degrees c to 90 degrees c .

Flange Size: 8" = 14.5 x 16", 10" = 16.5 x 18" flange, 9" = 15.5 x 17.25"

Available in colors: White, Gray, Brown, Black, Weathered Wood.

Made in the U.S.A.

Installation Instructions

Fitting: First, remove interfering shingle nails around the perimeter of the roof opening. Second, depending on the application, apply a bead of shingle adhesive along the bottom of the flange, and slide the top end of the boot up and under the shingle. Last, allow the bottom vent flange to lie on top of the shingles or cut the shingle to fit.

Mounting: Take care to keep the boot properly aligned. Nail in place using 1-1/4” coated or stainless roofing nails spaced 6” to 8” on center, or at least 3 per side, maximum of 1” from the outer edge of the flange, and 1-1/2” from each corner. Apply roofing cement to all shingle edges and nail heads to prevent water infiltration. It is recommended to caulk around the entire perimeter, under the vent flanges, and near the outer edges (7108 Permathane Sealant), especially in severe weather coastal hurricane zones.

The Bullet Goose Neck Vent, also known as, the Bullet Vent is used to vent kitchen hoods and to vent dryer vents. It's light weight and comes in a two-piece design, almost indestructible heavy duty thermoplastic elastomer. 

It has a built-in cricket to enhance water flow. The Bullet Goose Neck Vent also has built-in flashing and a removable mesh that must be removed if the Bullet Vent is used as a dryer vent. 

The dampener on the inside is to prevent back-flow of lint or vented air.

A great benefit that saves time and money is that the Bullet Goose Neck Vent doesn’t need to be painted because it comes in several colors. The Bullet Vent will not crack in either extreme cold or extreme heat.

The Bullet Goose Neck Vent is available in three sizes. 

The 8 inch and the 10 inch are both 9 inches tall, available in the colors: black, brown, gray, weathered wood and white. The 9 inch Bullet Goose Neck Vent is 12 ½ inches tall and it is designed for tile roofs. The 9 inch vent comes in limited colors: Brown, Gray, Terracotta, and Weathered Wood.

The Bullet Goose Neck Vent, just like the other Bullet Products (Bullet Boot, Bullet Boot TPO, Bullet Stealth, Bullet Stealth 2) are made in the United States. All of the Bullet Products are Florida Product Approved with the specific number of the Bullet Vent being FL 25870.2.

With 12 fasteners, it has a wind uplift resistance of -305 pounds per square feet. When installing, it is recommended (although not necessary), to add ice and water shield underlayment below the Bullet Vent to waterproof the penetration.

Roof jacks are, currently, the most common products used to vent dryer vents, but the roof jacks have huge problems when compared to the Bullet Goose Neck Vents. The roof jacks arrive at your roof project site dented, scratched, and some even arrive crushed because it’s difficult to ship them without damaging them.  Insurance adjusters have been known to deny insurance claims siting the inability to distinguish between pre-existing damage and hail damage. Continuing to install traditional metal roof jacks could be costing roofing contractors in the long run.

The traditional roof jack is supposed to arrive in new condition, but damage during transportation is unavoidable because the roof jacks are made out of metal. The roof jack shown on the video is new, yet it has several scratches and dents. The new roof jack is not only a mess, but they don’t come with a mesh so debris and rodents will get into the house from that opening.

Who are the Webflow founders?

What’s a Rich Text element?

The rich text element allows you to create and format headings, paragraphs, blockquotes, images, and video all in one place instead of having to add and format them individually. Just double-click and easily create content.

Static and dynamic content editing

A rich text element can be used with static or dynamic content. For static content, just drop it into any page and begin editing. For dynamic content, add a rich text field to any collection and then connect a rich text element to that field in the settings panel. Voila!

How to customize formatting for each rich text

Headings, paragraphs, blockquotes, figures, images, and figure captions can all be styled after a class is added to the rich text element using the "When inside of" nested selector system.

Product

Product

No items found.
No items found.
No items found.

Related Items..

Related Items..

Name
Information

What’s a Rich Text element?

The rich text element allows you to create and format headings, paragraphs, blockquotes, images, and video all in one place instead of having to add and format them individually. Just double-click and easily create content.

Static and dynamic content editing

A rich text element can be used with static or dynamic content. For static content, just drop it into any page and begin editing. For dynamic content, add a rich text field to any collection and then connect a rich text element to that field in the settings panel. Voila!

How to customize formatting for each rich text

Headings, paragraphs, blockquotes, figures, images, and figure captions can all be styled after a class is added to the rich text element using the "When inside of" nested selector system.

The Roof Store Logo with white round background
Free Shipping
Nationwide
Only $25
Buy in bulk