Roof Vent Boot Guard protects lead pipe boots from the rodents that like to chew the lead. Size: Small has 25 units per box. Size: Large has 16 units per box. Size: XL has 12 units per box. Free Shipping on all Bulk Orders. One-piece molded guard permanently stops costly damage to your roof vent boot and prevents leaks. Quick installation and removal allows for plumber access whenever repairs are needed.
Installation Instructions:
Step 1. Replace the damaged lead boot prior to installing the Roof Vent Boot Guard. Make sure the lead is tightly formed around the plumbing pipe. Note: It may be necessary to form the lead boot into a cylindrical shape by tapping it with a hammer.
Step 2. Back out set screws at base of Boot Guard. Place over lead stack. Lightly tap into place. Snug set screws into lead stack. Note: additional screws provided for use on 2 inch lead boots.
Step 3. The pipe vent shield has already been molded to accommodate standard pitch roofs. To achieve a steeper angle, simply trim the material from the rear of the boot guard using pitch marks, which are provided on the bottom of the guard. They start at 5/12" on the bottom and end at 8/12" at the top mark.
The manufacturer will replace this product 10 years from the date of purchase if it fails to protect your property's lead boot from rodent damage after being properly installed.
.png){kind=icon}
